Du er her: nordcad.dk Service Release 16.6 Capture CIS nyheder Capture CIS tidligere forbedringer

16.6 Overblik

Capture CIS

PSpice A/D

PCB Editor

Workshop

Få en demo

Kontakt os

Forbedringer til OrCAD Capture CIS før 16.6

16.5 Features and Enhancements

Du kan se release 16.5 nyheds film direkte på support.cadence

 

  • Graphical Operation Locking (GOp): The GOp locking feature in Capture now allows you to lock the different parts of a schematic design. Lock objects on a page, folder, or even the complete design. This feature prevents inadvertently moving or deleting parts of a design that are locked. Designs requiring alteration will need to be unlocked before any changes are made.
  • Placement Report: Generate a report of the X and Y locations of the placement of the parts on a schematic. This report, generated as a .CSV file, provides these details of the parts:
    • Reference Designator
    • Part Name
    • Schematic Name
    • Sheet Number
    • File System Location of the Part Library
    • X and Y co-ordinate location
  • Find Results Report: After executing the Find command on a design, generate a report for the results from the command. By running the Find command to search for different types of objects in a design, the search results display in different tabs of the Find window, allowing you to export the data from each tab.
  • Net Groups: OrCAD Capture introduces the concept of the NetGroup that allows you to create groups of nets. A NetGroup can include a group of scalar nets, vector nets, or a combination of both. Capture allows you to create Named NetGroups that can be used across a design or exported to other designs. Alternatively, for one-time use, you can create an Unnamed/Adhoc NetGroup. The new NetGroup Connector can be used to intelligently merge and tap out signals. It can also be used to generate net names for connected signals.
  • CIS.INI Settings: While the Capture INI settings are always dynamic, the CIS settings are more or less static and usually do not change after the initial CIS database related setup. You may often need to clear out and reinitialize your Capture INI settings, but may still want to retain the CIS settings. To allow this, OrCAD 16.5 now retains the CIS INI settings in a separate back-up file. This file retains the CIS INI settings that Capture will retrieve when it re-initializes the Capture INI settings.
  • Partial Design Simulation: The 16.5 release comes with the productivity enhancing feature of partial design simulation. You can now identify individual components of any design, and, using the partial design simulation feature, simulate only selected portions. Using this feature, you can simulate different circuits in the design with different simulation profiles. You can also netlist only a particular portion of the design. In addition, you can compare and merge portions of a design quickly.

16.3 Features and Enhancements

Du kan se release 16.3 nyhedsfilm her på nordcad.dk: http://nordcad.dk/dk/film/release_film/163_nyhedsfilm.htm

16.2 Features and Enhancements

Du kan se release 16.3 nyhedsfilm her på nordcad.dk: http://nordcad.dk/dk/film/release_film/162_nyhedsfilm.htm

  • Usability enhancements
  • Enhanced OrCAD Capture and PCB Editor integration
  • Improved FPGA design-in functionality
  • New annotation type option
  • DRC enhancements
  • Netlist enhancements
  • L2A integration in OrCAD Capture
  • User interface updates
  • CIS RDBMS support
  • CIS configuration file in XML format
  • New ActiveParts Portal in ICA

16.0 Features and Enhancements

  • Place and move drawing objects on fine grid independent of connectivity objects
  • Enhancements to archiving mechanism for PSpice model libraries
  • Cadence Help
  • Support for mechanical parts and assemblies in standard CIS BOM

15.7 Features and Enhancements

  • Controlled annotation of parts
  • PSpice ground zero symbol
  • Mouse wheel support
  • New option to set the drag behavior
  • New unit values in the signal flow properties UI
  • Customize netlist formatter
  • Descend hierarchy using the mouse button double-click
  • Saving queries
  • Version 11.0 of Crystal Reports

10.5 Features and Enhancements

  • Split part symbol generation enhancement
  • Archiving enhancement
  • Differential pairs between flat nets
  • New part creation from spreadsheet
  • Assigning signal flow properties to a bus
  • Setting preferences for linking a placed part to a database part
  • Viewing design variants information

10.3 Features and Enhancements

  • Split part symbol generation
  • Signal property flow to PCB Editor
  • Page navigation
  • Replace cache with preserve reference designator
  • Import the latest Xilinx and Altera formats

10.0 Features and Enhancements

  • Design-level property management
  • Unlimited undo/redo
  • Label states for what-if scenarios
  • Enhanced support for simulation profiles
  • New directory structure for analog projects
  • Annotation improvements
  • Soft save
  • Automatic backup of designs
  • Dynamic port/pin updates on hierarchical blocks
  • File locking for team design
  • Ability to run multiple versions of OrCAD Capture
  • Printing and plotting enhancements
  • Support for design reuse in OrCAD Layout
  • Significant improvements in OrCAD Capture-Allegro PCB flow
  • Push occurrence properties into instance utility
  • Support for Xilinx Design Manager version 4.1 and 4.2 output files
  • Improved EDIF 2 0 0 import/export functionality

 

16.6 Overblik

Capture CIS

PSpice A/D

PCB Editor

Workshop

Få en demo

Kontakt os

Cookies

Nordcad anvender cookies til at indsamle viden om anvendelsen af hjemmesiden, og for at sikre brugere den bedste oplevelse. Hvis du klikker videre på siden, accepterer du vores brug af cookies. Læs om vores cookies- og privatlivspolitik her.

Nordcad Systems A/S
Vesteraa 15
DK-9000 Aalborg

   


tel.: +45 96 31 56 90
info@nordcad.dk

We'd like to connect with you!